Charging Curve Development
Configure the charging profile for the selected battery chemistry and battery supplier requirements.
EPC INDUSTRIAL CHARGING SOLUTIONS
Aerial Work Platform Battery Chargers
Compare 24V–72V chargers for scissor lifts, boom lifts and MEWPs, with lead-acid/lithium compatibility and OEM integration.
- 24V–72V charger options
- Lead-acid and lithium configurations
- CAN support on selected models
- On-board and off-board integration
Find the Right Charging Path for Your MEWP
Scissor Lift Chargers
For compact and full-size electric scissor lifts using 24V or 48V battery systems.
Boom Lift Chargers
High-output charger configurations for electric and hybrid boom lifts with larger battery systems.
Vertical Mast & Other MEWP Chargers
Compact on-board solutions for vertical mast lifts and specialized access equipment.
Compare EPC Charger Models
The models below use specifications cross-checked against EPC manufacturer product data. Final charging curves, connectors and communication settings are configured for the target battery system.
Model EPC2436
EPC 24V 36A Industrial Charger
- 24V nominal system
- 36A maximum output
- 850W maximum output power
- IP66 enclosure
- CAN communication
- Lead-acid / lithium configuration
Recommended For
Scissor lifts and high-duty 24V MEWPs
Model EPC4830
EPC 48V 40A Industrial Charger
- 48V nominal system
- 40A maximum output
- 2000W maximum output power
- IP66 enclosure
- CAN communication
- Lead-acid / lithium configuration
Recommended For
Medium-duty scissor lifts, vertical mast lifts and 48V MEWPs
Model EPC7280
EPC 72V 80A High-Power Charger
- 72V nominal system
- 80A maximum output
- 6000W maximum output power
- IP66 enclosure
- CAN communication
- Lithium-ion configuration
Recommended For
High-capacity boom lifts and heavy-duty 72V MEWPs
Output and application guide
Match Charger Output to Your Platform
Use system voltage, maximum current and output power to narrow the options for your lift. Then confirm battery chemistry, connector, communication and installation with EPC engineering.
| Model | Output | Battery compatibility | Communication | Protection | Installation | Typical application |
|---|---|---|---|---|---|---|
| 24V 30A | 24V · 30A · 800W34V max DC output | Lead-acid / LithiumFlooded, AGM and GEL listed | CAN standard | IP66 | On-board installation | Scissor lift / compact MEWP |
| 24V 36A | 24V · 36A · 850W34V max DC output | Lead-acid / LithiumFlooded, AGM and GEL listed | CAN standard | IP66 | On-board installation | High-duty 24V platform |
| 48V 15A | 48V · 15A · 750W68V max DC output | Lead-acid / LithiumFlooded, AGM and GEL listed | CAN standard | IP66 | On-board installation | Scissor lift / light-duty AWP |
| 48V 20A | 48V · 20A · 1000W68V max DC output | Lead-acid / LithiumFlooded, AGM and GEL listed | CAN standard | IP66 | On-board installation | Engineering match required |
| 72V 80A | 72V · 80A · 6000W112V max DC output | Lead-acid / LithiumFlooded, AGM and GEL listed | CAN standard | IP66 | On-board installation | Boom lift / high-capacity AWP |
Product specifications are taken from the EayPower product manual. Please contact EPC to confirm the correct charger model and configuration for your equipment and battery system.
Five-step selection guide
How to Select an AWP Battery Charger
Confirm the nominal battery voltage.
Identify the battery chemistry and required charging profile.
Provide battery capacity in Ah and the required charging time.
Confirm connector, mounting, cable, and CAN communication requirements.
Not sure which model fits? Send EPC your equipment model, battery label and connector photo for engineering review.
Application-specific requirements
AWP Operating Requirements
Convert broad durability claims into requirements that can be checked against each charger model and installation.
| AWP condition | Charger requirement | EPC solution |
|---|---|---|
| Outdoor dust and moisture | Sealed enclosure | IP rating confirmed by model |
| Continuous vibration | Mechanical durability | Potting and mounting design confirmed for the selected configuration |
| Rental fleet misuse | Protection and diagnostics | Fault indication and protection functions confirmed by model |
| Lithium battery system | BMS communication | CAN available on selected models |
| Limited installation space | Compact on-board design | Dimensions and mounting points confirmed by model |
| Frequent charge cycles | Correct charging profile | Battery-specific charging curve |
No single protection level, communication interface or certification scope is claimed for the full range. Confirm all requirements on the final model datasheet.
Engineering and production support
OEM Charger Integration for MEWP Manufacturers
EPC supports charger matching and integration based on your battery system, equipment layout and target market.
CAN Integration
Review communication protocol, BMS messages and system-level control requirements.
Connector & Cable Configuration
Match connector type, pin definition, cable length and output interface.
Mechanical Integration
Confirm mounting points, enclosure dimensions, installation space and cooling conditions.
Remote Status Indication
Review remote LED, charging status and fault indication requirements.
Label & Private Branding
Configure approved model labels, nameplates and customer branding.
Sample Validation
Validate the configured sample on the intended battery and equipment platform.
Certification Review
Review available certifications by model against the destination market.
- STEP 01 Customer Data
- STEP 02 Engineering Match
- STEP 03 Configured Sample
- STEP 04 Equipment Validation
- STEP 05 Mass Production
EPC Charger Series
Discover EPC’s range of industrial battery chargers designed for aerial work platforms and other electric equipment. With multiple voltage, current, and battery compatibility options, our product series helps customers easily compare configurations and select the right charger for their application.
Compatible with scissor lifts, compact MEWPs and other 24V electric equipment
Compatible with high-duty 24V platforms and also used in forklifts and utility vehicles
Compatible with boom lifts and other high-capacity 72V electric equipment
Compatible with 48V utility vehicles and cross-platform battery systems
Compatible with 48V industrial equipment and floor care machines
Compatible with 48V scissor lifts, utility platforms and light-duty electric equipment
Engineering model matching
Get an AWP Charger Recommendation
Send your equipment and battery details for model matching. A battery label, existing charger label and connector photo will help engineering review the application more accurately.